|
Applications
Drum heaters and container heaters are used to heat up liquids in drums and IBC containers. Thereby the viscosity can be reduced to allow for easy pumping and crystallisation can be avoided.
Structure
Winkler drum heaters and container heaters are flexible heating mats, that are intalled directly on the container to be heated. Thus they allow a very efficient and space-saving heating of drums and IBC containers directly on site. The regular spacing of heating cable and the integrated control avoid overheating of the container and ist contents. The robust design and high quality materials and components ensure a safe and reliable operation.
Features and Benefits
- Light, compact, economical.
- Easy and quick installation with a flick of the wrist.
- Adjustable fasteners adapt to different sizes of containers.
- Efficient and gentle heating through direct contact and integrated insulation.
- Special solutions with different dimensions and electrical specifications upon request.
Tmax = 120 °C
Available for drums of 200l - 220 l
For all types of drums
Drum Heater Series WODS for Steel Drums
Structure
- Silicone coated glass fibre sheet with incorporated double insulated heating conductor. Moisture proof and chemically resistant surface. Protection rating IP40. Available for mains voltages 230 VAC or 115 VAC. Double insulated.
- Easy mounting with hooks and tension spring. High flexibility -> optimum heat transfer.
- Thermostat 0–120 °C with two indicator lights and 2,0 m power cable with plug.
- Drum sizes, power ratings and dimensions see table.
Tmax = 150 °C
Available for drums of 30 l - 220 l
For all types of drums
Base Drum Heater Serie WOBD for Steel Drums
Structure
- Robust 2 mm steel construction with resilient high temperature coating
- Tapered edges for safe ease of drum location.
- Even heat distribution over platen area. Excellent thermal insulation to prevent floor heating.
- Available for mains voltages 230 VAC or 115 VAC.
- Thermostat 0–120 °C with two indicator lights and 2,0 m reinforced power cable with plug.
Tmax = 150 °C
Available for drums of 30 l - 220 l
For all types of drums
Insulation Jacket Series WODD
Structure
- Outer surface of water-repellent polyester fabric.
- Easy fixation by means of Velcro fasteners.
- Flap lid for easy opening of bung holes.
- Drum sizes and dimensions see table.
Tmax = 150 °C
Available for drums of 30 l - 220 l
For all types of drums
Insulation Jacket Series WODD
Structure
- Outer surface of water-repellent polyester fabric.
- Easy fixation by means of Velcro fasteners.
- Flap lid for easy opening of bung holes.
- Drum sizes and dimensions see table.
Tmax = 90 °C
Available for containers of 1000 l
Insulation Jacket Series WODD
Structure
- Outer surface of water-repellent polyester fabric.
- Easy fixation by means of Velcro fasteners.
- Flap lid for easy opening of bung holes.
- Drum sizes and dimensions see table.
Tmax = 90 °C
Available for containers of 1000 l
Insulation Jacket Series WODD
Structure
- Outer surface of water-repellent polyester fabric.
- Easy fixation by means of Velcro fasteners.
- Flap lid for easy opening of bung holes.
- Drum sizes and dimensions see table.
|
